Piezo-Tronic Triaxial IEPE Accelerometer - A/130

10mV/g up to 500mV/g ∙ 40.9gm ∙ -50°C to 125°C

Model Variations

A/130/V, A/130/V-1

Applications

Modal Analysis of lightweight structures
Automotive
Aerospace
Machine Monitoring
Condition Monitoring
Impact Testing
Vibration Shaker Testing
Structural Testing
Auto/Aero structural body surveys

General purpose triaxial accelerometer compromising three, Konic Shear® IEPE welded inserts, bonded orthogonally into hard anodized aluminium housing. The inserts are electrically insulated individually and from the housing, thus eliminating ground loop interference. Low impedance O/P provides a high degree of noise immunity and allows use with low cost coaxial cable. The additional mechanical isolation implicit in the construction provides also near elimination of strain induced error.

The d33 component suppression property of the Konic design, resulting in minimization of cross axis error, is particularly advantageous for three axis measurement integrity.

The multi sensor solution also offers the benefit of being repairable. If an insert is damaged it can usually be removed and replaced saving the cost of a new accelerometer

Tri-axial Mounting Block - A/130.Shim

The A/130.shim has been designed for use with the A/130/V.1 specifically for 5000g triaxial shock measurements, it provides a flexible mounting plate for modification to suit oddly shaped surfaces

Dimensions: 25.4 x 25.4 x 5mm think

Material: Aluminium

3 x 3mmΦ mounting holes

Calibration

All DJB Accelerometers are calibrated on site prior to despatch, and are accompanied by a calibration chart with temperature and frequency responses listed. Periodic calibration can be carried out with our VC-01 Handheld Calibrator whilst we also offer a full calibration service including cross axis checks to aid accuracy of data. We are able to provide this service for all makes of accelerometer with a full report given for each device. Please contact us with an enquiry

Cable Assembly and Repair Service

Cable Repair Service to make current cabling as good as new, cutting costs whilst good for the environment
Specialist Cable Assembly - for all manufacturers
Cable and connector stock held for a quick turnaround