Instrumented Impact Hammer IH-50 - 50kN Range
0.1mV/N ∙ 1000gm ∙
The IH-50 impact hammer belongs to a range of general purpose hammers used for structural health testing, resonance determination and modal analysis, the IH-50 itself being suitable for more heavy weight testing.
Included within the hammer is a piezoelectric IEPE force sensor in which directly outputs a voltage signal.
Each hammer is supplied as a kit including a cable and a variety of tips able to suit a variety of testing requirements.
The IH-50 has a BNC terminating connector and an additional mass (optional) that can be attached to the rear of the hammer head. Impact pulse width and frequency response varies with different hammer heads and tips. It should be based on actual tests.
The IH-20 impact hammer belongs to a range of general purpose hammers used for structural health testing, resonance determination and modal analysis, the IH-20 itself being suitable for larger structures and heavy weight products.
Included within the hammer is a piezoelectric IEPE force sensor in which directly outputs a voltage signal.
Each hammer is supplied as a kit including a cable and a variety of tips able to suit a variety of testing requirements.
The IH-20 has a BNC terminating connector and an additional mass that can be attached to the rear of the hammer head. Impact pules width and frequency response is different with different hammer heads and tips. It should be based on actual tests.
